
ISOL 1000
- Maximum vertical load 5.000 kN
- Maximum horizontal load 1.350 kN
- Maximum stroke +/- 500 mm
- Maximum velocity 0.9 m/s
Devices that can be tested:
- Elastomeric bearings
- Lead-rubber bearings
- Pendulums
- Sliders

ISOL 2500
- Maximum vertical load 22.000 kN
- Maximum horizontal load 3.000 kN
- Maximum stroke +/- 750 mm
- Maximum velocity 1.2 m/s
Devices that can be tested:
- Elastomeric bearings
- Lead-rubber bearings
- Pendulums
- Sliders

OLEO 650
- Servocylinder 6.500 kN
- Maximum horizontal load 6.500 kN
- Maximum stroke +/- 525 mm
- Maximum velocity 0.4 m/s
Devices that can be tested:
- Rigid connections (Shock Transmitter Units, Fuse Bolts)
- Displacement dependent devices
- Velocity dependent-devices (Fluid Viscous Dampers, Spring Dampers)

OLEO 140
- Servocylinder 1.400 kN
- Maximum horizontal load 1.350 kN
- Maximum stroke +/- 300 mm
- Maximum velocity 0.8 m/s
Devices that can be tested:
- Rigid connections (Shock Transmitter Units, Fuse Bolts)
- Displacement dependent devices
- Velocity dependent-devices (Fluid Viscous Dampers, Spring Dampers)

The seal-wear test machine
A machine capable of carrying out stress tests on the seal components of the selected device.
- Maximum stroke +/- 110 mm
- Maximum stroke +/- 50 mm

Thermal Chamber
A thermal chamber is very important to bring the devices at a determined temperature before performing the tests: our chamber reaches a range of temperature between +70°C and
a -70°C
- Minimum temperature -70°
- Maximum temperature +70°

Sliding Test Machine
Designed for test performance on sliding materials, the Sliding test machine works in double configuration to reduce by half the technical time.